GL852 USB 2.0 MTT HUB Controller
1: Power Self
0: Power Bus
PSELF
Inside GL852
On PCB
Figure 5.7 - SELF/BUS Power Setting
5.2.4 LED Connections
GL852 controls the LED lighting according to the flow defined in section 11.5.3 of Universal Serial Bus
Specification Revision2.0. Both manual mode and Automatic mode are supported in GL852. When GL852
is globally suspended, GL852 will turn off the LED to save power.
AMBER/GREEN
LED
DGND
Inside GL852
On PCB
Figure 5.8 - LED Connection
©2000-2009 Genesys Logic Inc. - All rights reserved.
Page 23