Document Reference No.: FT_000236
V2DIP1-48 VNC2-48 Development Module Datasheet Version 1.01
Clearance No.: FTDI# 153
`
2
Features
Uses FTDI’s VNC2-48Q embedded USB host
controller IC device
Single USB ‘A’ type socket to interface with
USB peripheral devices
Connnection to a second USB interface port
available via module I/O pins if required.
Jumper selectable UART, parallel FIFO or SPI
MCU interfaces
UART, parallel FIFO and SPI interfaces can be
programmed to a choice of available I/O pins
Single 5V supply input from DIL connectors or
5V supplied via USB VBUS slave interface or
debugger module.
All VNC2 signals available on 0.6” wide, 0.1”
pitch DIL male connectors.
Auxiliary 3.3 V / 200 mA power output to
external logic.
Power and traffic indicator LED’s
V2DIP1-48 is a Pb-free, RoHS complaint
development module.
Debugger interface pin available via 6 way
male header which interfaces to separate
debugger module.
Firmware upgrades via UART or debugger
interface.
FOC software development supported through
Vinculum software development tool suite IDe
consisting integrated compiler, linker, and
debugger capabilities.
The V2DIP1 48 incorporates
the following features
:
Copyright © 2010 Future Technology Devices International Limited
3