`
Document Reference No.: FT_000198
MORPH-IC-II Datasheet
Version 1.02
Clearance No.: FTDI#
164
3.5.2 GPIO Connections
The programming interface used by channel B of FT2232H is outlined at the beginning of section 3.5.
Once the FPGA has been programmed, channel B of FT2232H can be redefined to utilise the six GPIO
connections to the FPGA. These GPIO connections are illustrated in Fig. 8.
GPIO Connections
44
45
BB1
A8
A4
BB2
USB
FT2232HQ USB
INTERFACE I.C
48
BB3
B4
54
BB4
B11
A11
ALTERA CYCLONE II
EP2C5F256C8N
FPGA
58
BB5
59
BB6
B9
Fig. 8 – GPIO Connections
3.5.3 Morph-IC-II JTAG Connections
The interface between a JTAG programmer and Morph-IC-II‟s JTAG interface is illustrated in Fig. 9. The
block on the left represents a programmer that will interface with the Morph-IC-II. The block on the right
represents the Morph-IC-II FPGA module.
JTAG TDI
JTAG TDI
JTAG TDO
JTAG TDO
JTAG TMS
JTAG TMS
JTAG TCK
JTAG TCK
JTAG Programmer
Morphic-II
Fig. 9 – JTAG Programmer Interface
Copyright © 2010 Future Technology Devices International Limited
16