FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet
Version 2.4
Document No.: FT_000060 Clearance No.: FTDI#78
3.2.4.2
FT4232H-56Q pins used in a Synchronous or Asynchronous Bit-Bang
Interface
The FT4232H channel A, B, C or channel D can be configured as a bit-bang interface. There are two types
of bit-bang modes: synchronous and asynchronous.
When configured in any bit-bang mode (synchronous or asynchronous), the pins used and the descriptions
of the signals are shown in Table 3.13
Channel
Number
Synchronous or Asynchronous Bit-Bang
Configuration Description
Pin Nos.
Name
Type
A
B
C
D
20,19,18,17
,
ADBUS[7:0]
I/O
Channel A, D7 to D0 bidirectional bit-bang data
Channel B, D7 to D0 bidirectional bit-bang data
15,14,13,12
29,28,27,26
,
BDBUS[7:0]
I/O
25,24,23,22
40,39,38,37
,
CDBUS[7:0]
DDBUS[7:0]
I/O
I/O
Channel C, D7 to D0 bidirectional bit-bang data
Channel D, D7 to D0 bidirectional bit-bang data
35,34,33,32
53,52,51,49
48,47,46,42
Table 3.13 Channel A, B, C and D Synchronous or Asynchronous Bit-Bang Configured Pin
Descriptions for FT4232H-56Q
For a functional description of this mode, please refer to section 4.5 Synchronous & Asynchronous Bit-Bang
Interface Mode Desc..
Copyright © Future Technology Devices International Limited
18
FTDI [ FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD. ]
