Electrical Characteristics
1.10
PCI Express® Controller
The PCI Express® controller includes the following features:
• PCI Express 1.0a compatible
• Two
×1
links or one
×2
link width
• Auto-detection of number of connected lanes
• Selectable operation as root complex or endpoint
• Both 32- and 64-bit addressing
• 128-byte maximum payload size
• Support for MSI and INTx interrupt messages
• Virtual channel 0 only
• Selectable Traffic Class
• Full 64-bit decode with 32-bit wide windows
• Dedicated four channel descriptor-based DMA engine per interface
1.11
Enhanced Secured Digital Host Controller (eSDHC)
The enhanced SD Host Controller (eSDHC) has the following features:
• Conforms to
SD Host Controller Standard Specification, Rev 2.0
with Test Event register support.
• Compatible with the
MMC System Specification, Rev 4.0
• Compatible with the
SD Memory Card Specification, Rev 2.0,
and supports High Capacity SD
memory cards
• Compatible with the
SDIO Card Specification Rev, 1.2
• Designed to work with SD Memory, miniSD Memory, SDIO, miniSDIO, SD Combo, MMC,
MMCplus, MMC 4x, and RS-MMC cards
• SD bus clock frequency up to 50 MHz
• Supports 1-/4-bit SD and SDIO modes, 1-/4-bit MMC modes
• Supports internal DMA capabilities
2
Electrical Characteristics
This section provides the AC and DC electrical specifications and thermal characteristics for the
MPC8378E. The device is currently targeted to these specifications. Some of these specifications are
independent of the I/O cell, but are included for a more complete reference. These are not purely I/O buffer
design specifications.
2.1
Overall DC Electrical Characteristics
This section covers the ratings, conditions, and other characteristics.
MPC8378E PowerQUICC
™
II Pro Processor Hardware Specifications, Rev. 2
6
Freescale Semiconductor