欢迎访问ic37.com |
会员登录 免费注册
发布采购

MK51DX256CLK7 参数 Datasheet PDF下载

MK51DX256CLK7图片预览
型号: MK51DX256CLK7
PDF下载: 下载PDF文件 查看货源
内容描述: K51次家庭 [K51 Sub-Family]
分类和应用:
文件页数/大小: 77 页 / 1911 K
品牌: FREESCALE [ Freescale ]
 浏览型号MK51DX256CLK7的Datasheet PDF文件第13页浏览型号MK51DX256CLK7的Datasheet PDF文件第14页浏览型号MK51DX256CLK7的Datasheet PDF文件第15页浏览型号MK51DX256CLK7的Datasheet PDF文件第16页浏览型号MK51DX256CLK7的Datasheet PDF文件第18页浏览型号MK51DX256CLK7的Datasheet PDF文件第19页浏览型号MK51DX256CLK7的Datasheet PDF文件第20页浏览型号MK51DX256CLK7的Datasheet PDF文件第21页  
General  
Table 6. Power consumption operating behaviors (continued)  
Symbol Description  
Min.  
Typ.  
Max.  
Unit  
Notes  
IDD_VBAT Average current when CPU is not accessing  
RTC registers  
10  
• @ 1.8V  
• @ –40 to 25°C  
• @ 70°C  
0.57  
0.90  
2.4  
0.67  
1.2  
μA  
μA  
μA  
• @ 105°C  
• @ 3.0V  
3.5  
• @ –40 to 25°C  
• @ 70°C  
0.67  
1.0  
0.94  
1.4  
μA  
μA  
μA  
• @ 105°C  
2.7  
3.9  
1. The analog supply current is the sum of the active or disabled current for each of the analog modules on the device. See  
each module's specification for its supply current.  
2. 72MHz core and system clock, 36MHz bus clock, and 24MHz flash clock. MCG configured for FEE mode. All peripheral  
clocks disabled.  
3. 72MHz core and system clock, 36MHz bus clock, and 24MHz flash clock. MCG configured for FEE mode. All peripheral  
clocks enabled.  
4. Max values are measured with CPU executing DSP instructions.  
5. 25MHz core, system, bus and flash clock. MCG configured for FEI mode.  
6. 4 MHz core and system clock, 4 MHz and bus clock, and 1 MHz flash clock. MCG configured for BLPE mode. All  
peripheral clocks disabled. Code executing from flash.  
7. 4 MHz core and system clock, 4 MHz and bus clock, and 1 MHz flash clock. MCG configured for BLPE mode. All  
peripheral clocks enabled but peripherals are not in active operation. Code executing from flash.  
8. 4 MHz core and system clock, 4 MHz and bus clock, and 1 MHz flash clock. MCG configured for BLPE mode. All  
peripheral clocks disabled.  
9. Data reflects devices with 128 KB of RAM. For devices with 64 KB of RAM, power consumption is reduced by 2 μA.  
10. Includes 32kHz oscillator current and RTC operation.  
5.2.5.1 Diagram: Typical IDD_RUN operating behavior  
The following data was measured under these conditions:  
• MCG in FBE mode for 50 MHz and lower frequencies. MCG in FEE mode at greater  
than 50 MHz frequencies.  
• USB regulator disabled  
• No GPIOs toggled  
• Code execution from flash with cache enabled  
• For the ALLOFF curve, all peripheral clocks are disabled except FTFL  
K51 Sub-Family Data Sheet, Rev. 2, 4/2012.  
Freescale Semiconductor, Inc.  
17  
 复制成功!