Freescale Semiconductor, Inc.
Serial Communications Interface (SCI)
SCI I/O Registers
WAKE — Wakeup Bit
This read/write bit determines which condition wakes up the SCI: a
logic 1 (address mark) in the most significant bit position of a received
character or an idle condition of the PD0/RDI pin. Reset has no effect
on the WAKE bit.
1 = Address mark wakeup
0 = Idle line wakeup
10.6.3 SCI Control Register 2
SCI control register 2 (SCCR2) shown in Figure 10-7 has these
functions:
• Enables the SCI receiver and SCI receiver interrupts
• Enables the SCI transmitter and SCI transmitter interrupts
• Enables SCI receiver idle interrupts
• Enables SCI transmission complete interrupts
• Enables SCI wakeup
• Transmits SCI break characters
Address: $000F
Bit 7
TIE
0
6
TCIE
0
5
RIE
0
4
ILIE
0
3
TE
0
2
RE
0
1
RWU
0
Bit 0
SBK
0
Read:
Write:
Reset:
Figure 10-7. SCI Control Register 2 (SCCR2)
TIE — Transmit Interrupt Enable Bit
This read/write bit enables SCI interrupt requests when the TDRE bit
becomes set. Reset clears the TIE bit.
1 = TDRE interrupt requests enabled
0 = TDRE interrupt requests disabled
MC68HC705C8A — Rev. 3
MOTOROLA
Technical Data
Serial Communications Interface (SCI)
For More Information On This Product,
Go to: www.freescale.com
FREESCALE [ Freescale ]
