STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics (continued)
All characteristics are for the analog chip only. Refer to the 68HC908EY16 datasheet for characteristics of the microcontroller
chip. Characteristics noted under conditions 9.0 V ≤ VSUP ≤ 16 V, -40°C ≤ TJ ≤ 125°C unless otherwise noted. Typical values
noted reflect the approximate parameter mean at TA = 25°C under nominal conditions unless otherwise noted.
Characteristic
SWITCHABLE VDD OUTPUT HVDD
Symbol
Min
Typ
Max
Unit
Overcurrent Shutdown
IHVDDOC
25
35
50
mA
µs
Overcurrent Shutdown Blanking Time (20)
HVDDT1:0 = 00
tHVDDOCB
–
–
–
–
950
536
234
78
–
–
–
–
HVDDT1:0 = 01
HVDDT1:0 = 10
HVDDT1:0 = 11
Overcurrent Flag Delay (20)
tHVDDOCFD
VHVDDDROP
–
–
0.5
–
ms
Drop-Out Voltage @ ILOAD = 20 mA
110
300
mV
V
SUP DOWN SCALER (21)
Voltage Ratio (RATIO VSUP = VSUP / VADOUT
)
RATIOVSUP
4.75
5.0
5.25
–
INTERNAL DIE TEMPERATURE SENSOR (21)
Voltage / Temperature Slope (20)
Output Voltage @25°C
Notes
STtoV
VT25
–
26
–
mV/°C
V
1.7
1.9
2.1
20. This parameter is guaranteed by process monitoring but is not production tested.
21. This parameter is guaranteed only if correct trimming was applied
908E621
Analog Integrated Circuit Device Data
Freescale Semiconductor
13