Document Revision History (Continued)
Version History
Rev. 8
Description of Change
• In
added an entry for flash data retention with less than 100 program/erase
cycles (minimum 20 years).
• In
changed the device clock speed in STOP mode from 8MHz to 4MHz.
• In
changed the typical relaxation oscillator output frequency in Standby mode
from 400kHz to 200kHz.
Rev. 9
Rev. 10
In
changed the maximum ADC internal clock frequency from 8MHz to 5.33MHz.
Added the following note to the description of the TMS signal in
Note:
Always tie the TMS pin to V
DD
through a 2.2K resistor.
Please see http://www.freescale.com for the most current data sheet revision.
56F8013/56F8011 Data Sheet, Rev. 10
Freescale Semiconductor
Preliminary
3