MC33910BAC / MC34910BAC
FUNCTIONAL DEVICE OPERATIONS
OPERATIONAL MODES
The LIN driver is a low side MOSFET with over-current
LIN PHYSICAL LAYER
and thermal shutdown. An internal pull-up resistor with a
serial diode structure is integrated, so no external pull-up
components are required for the application in a Slave mode.
The fall time from dominant to recessive and the rise time
from recessive to dominant is controlled. The symmetry
between both slopes is guaranteed.
The LIN bus pin provides a physical layer for single-wire
communication in automotive applications. The LIN physical
layer is designed to meet the LIN physical layer specification
and has the following features:
• LIN physical layer 2.0 compliant
• Slew rate selection
• Over-current shutdown
LIN Pin
• Over-temperature shutdown
• LIN pull-up disable in Stop and Sleep modes
• Advanced diagnostics
The LIN pin offers a high susceptibility immunity level from
external disturbance, guaranteeing communication.
• LIN dominant voltage level selection
INTERRUPT
CONTROL
MODULE
WAKE-UP
MODULE
High-voltage
Shutdown
High Side
Interrupt
LIN
Wake-up
MOD1:2
LSR0:1
LINPE
VS1
LIN – DRIVER
LDVS
Slope and Slew Rate Control
Over-current Shutdown (interrupt maskable)
Over-temperature Shutdown (interrupt maskable)
RXONLY
RXSHORT
TXDOM
LINOT
LINOC
30K
LIN
TXD
RXD
SLOPE
CONTROL
LGND
WAKE-UP
FILTER
RECEIVER
Figure 39. LIN Interface
Slew Rate Selection
LIN Pull-up Disable In Stop and Sleep Mode
The slew rate can be selected for optimized operation at
10.4 and 20 kBit/s as well as a fast baud rate for test and
programming. The slew rate can be adapted with the bits
LSR1:0 in the LIN control register (LINCR). The initial slew
rate is optimized for 20 kBit/s.
To improve performance and for safe behavior in case of
LIN bus short to ground or LIN bus leakage during Low Power
mode the internal pull-up resistor on the LIN pin can be
disconnected by clearing the LINPE bit in the MCR. The bit
LINPE also changes the bus wake-up threshold (VBUSWU).
In case of a LIN bus short to GND, this feature will reduce
the current consumption in Stop and Sleep modes.
33910
Analog Integrated Circuit Device Data
Freescale Semiconductor
75