ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground, unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
ELECTRICAL RATINGS
Supply Voltage at VS1 and VS2
Normal Operation (DC)
Transient Conditions (load dump)
Supply Voltage at VDD
Input / Output Pins Voltage
CS, RST, SCLK, PWMIN, ADOUT0, MOSI, MISO, TXD, RXD
Interrupt Pin (IRQ)
V
IN(IRQ)
HS1 Pin Voltage (DC)
HS2 Pin Voltage (DC)
L1 Pin Voltage
Normal Operation with a series 33k
Ω
resistor (DC)
Transient input voltage with external component (according to ISO7637-2)
(See
VSENSE Pin Voltage (DC)
LIN Pin Voltage
Normal Operation (DC)
Transient input voltage with external component (according to ISO7637-2)
(See
VDD output current
ESD Voltage
Human Body Model - LIN Pin
Human Body Model - all other Pins
Machine Model
Charge Device Model
Corner Pins (Pins 1, 8, 9, 16, 17, 24, 25 and 32)
All other Pins (Pins 2-7, 10-15, 18-23, 26-31)
NC Pin Voltage (NC pins 11, 15, 16, 17, 19, 20, 21, 22, and 28)
V
ESD3-1
V
ESD3-2
V
NC
± 750
± 500
V
ESD1-1
V
ESD1-2
V
ESD2
± 8000
±2000
± 200
V
BUSDC
V
BUSTR
I
VDD
-18 to 40
-150 to 100
V
L1DC
V
L1TR
V
VSENSE
-18 to 40
±100
V
HS1
V
HS2
-0.3 to 11
- 0.3 to V
SUP
+0.3
- 0.3 to V
SUP
+0.3
V
V
V
V
IN
-0.3 to V
DD
+0.3
V
SUP(SS)
V
SUP(PK)
V
DD
-0.3 to 27
-0.3 to 40
-0.3 to 5.5
V
V
V
Symbol
Value
Unit
-27 to 40
V
V
Internally Limited
A
V
Notes
6. Exceeding voltage limits on specified pins may cause a malfunction or permanent damage to the device.
7. Extended voltage range for programming purpose only.
8. Testing is performed in accordance with the Human Body Model (C
ZAP
= 100 pF, R
ZAP
= 1500
Ω),
the Machine Model (C
ZAP
= 200 pF,
R
ZAP
= 0Ω), and the Charge Device Model, Robotic (C
ZAP
= 4.0pF).
9.
Special configuration recommended / mandatory for marked NC pins. Please refer to the typical application shown on page
33910
Analog Integrated Circuit Device Data
Freescale Semiconductor
5