F81867
GPIO8 Make Code 0 Register ⎯ Index D8h
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μC. The source of event is GPIO80.
7-0 GP_MAKE_CODE0 R/W 5VSB
0
GPIO8 Make Code 1 Register ⎯ Index D9h
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μCThe source of event is GPIO81.
7-0 GP_MAKE_CODE1 R/W 5VSB
0
GPIO8 Make Code 2 Register ⎯ Index DAh
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μC The source of event is GPIO82.
7-0 GP_MAKE_CODE2 R/W 5VSB
0
GPI8O Make Code 3 Register ⎯ Index DBh
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μC. The source of event is GPIO83.
7-0 GP_MAKE_CODE3 R/W 5VSB
0
GPIO8 Make Code 4 Register ⎯ Index DCh
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μC. The source of event is GPIO84.
7-0 GP_MAKE_CODE4 R/W 5VSB
0
GPIO8 Make Code 5 Register ⎯ Index DDh
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μC. The source of event is GPIO85.
7-0 GP_MAKE_CODE5 R/W 5VSB
0
GPIO Make Code 6 Register ⎯ Index DEh
Name R/W Reset Default
Bit
Description
This byte is used to assert the make code when the scan code event 0 is
occurred. The scan code events will set KBC OBF and put their make/break
code into the KBC output buffer. The break code is make code + 0x80 and
this function is implemented by μC. The source of event is GPIO86.
7-0 GP_MAKE_CODE6 R/W 5VSB
0
170
Dec, 2011
V0.12P