F75113
8.2.25 Chip ID1 Register – Index 5Ah
Bit
Name
R/W Default
10h CHIP ID1
Description
Description
Description
Description
7-0
CHIP_ID1
R
8.2.26 Chip ID2 Register – Index 5Bh
Bit
Name
R/W Default
11h CHIP ID2
7-0
CHIP_ID2
R
8.2.27 Vender ID1 Register – Index 5Dh
Bit
Name
R/W Default
19h VENDER ID1
7-0
VENDER_ID1
R
8.2.28 Vender ID2 Register – Index 5Eh
Bit
Name
R/W Default
34h VENDER ID2
7-0
VENDER_ID2
R
8.2.29 Base Address High Byte Register ⎯ Index 60h
Bit
Name
R/W Default
R/W 00h
Description
7-0
BA_H
The high-byte of Base Address
8.2.30 Base Address Low Byte Register ⎯ Index 61h
Bit
Name
R/W Default
R/W 00h The low-byte of Base Address
Description
7-0
BA_L
If Base-Address was set to 0200h and users wrote data at index 0200h(0201h, 0202h, 0203h and 0204h), the
GPIO0X(GPIO1X, GPIO2X, GPIO3X and GPIO4X) would output the data that users wrote. Then, users read index
0200h(0201h, 0202h, 0203h or 0204h) and would got the status of GPIO0X(GPIO1X, GPIO2X, GPIO3X and GPIO4X)
pins. Also, 0205h, 0206h and 0207h was reserved, so F75113 would only compare bit 23 ~ bit 3 of Base-Address.
- 67 -
Dec,2011
V0.13P