AT commands
Networking and security commands
Bit
Meaning
Setting
Description
Auto Associate
2
0
1
0
Device will not attempt association.
Device attempts association until success.
3
Poll coordinator on
pin wake
Pin Wake does not poll the Coordinator for indirect
(pending) data.
1
Pin Wake sends Poll Request to Coordinator to extract
any pending data.
4 - 7 Reserved
Default
0
A2 (Coordinator Association)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the Coordinator association options.
Parameter range
0 - 7 (bit field)
Bit field:
Bit
Meaning
Setting
Description
0
Allow Pan ID
reassignment
0
Coordinator will not perform Active Scan to locate available PAN
ID. It operates on ID (PAN ID).
Coordinator performs an Active Scan to determine an available
ID (PAN ID). If a PAN ID conflict is found, the ID parameter will
change.
1
0
1
Coordinator will not perform Energy Scan to determine free
channel. It operates on the channel determined by the CH
parameter.
1
2
Allow Channel
reassignment
Coordinator performs an Energy Scan to find the quietest
channel, then operates on that channel.
Allow
Association
0
1
Coordinator will not allow any devices to associate to it.
Coordinator allows devices to associate to it.
3 - 7 Reserved
The binary equivalent of the default value (0x06) is 00000110. ‘Bit 0’ is the last digit of the sequence.
Default
0
XBee/XBee-PRO S2C 802.15.4 RF Module User Guide
78
ETC [ ETC ]
