ESMT
M52D128168A
Operation Temperature Condition -40°C~85°C
Read interrupted by Precharge Command & Read Burst Stop Cycle @ Burst Length = Full page
*Note : 1. About the valid DQs after burst stop, it is same as the case of RAS interrupt.
Both cases are illustrated above timing diagram. See the label 1,2 on them.
But at burst write, Burst stop and RAS interrupt should be compared carefully.
Refer the timing diagram of “Full page write burst stop cycles”.
2. Burst stop is valid at every burst length.
Elite Semiconductor Memory Technology Inc.
Publication Date: Sep. 2008
Revision: 1.0 39/47