Page 8
Epson Research and Development
Vancouver Design Center
2 Interfacing to the PR31500/PR31700
The Philips MIPS PR31500/PR31700 processor supports up to two PC Card (PCMCIA)
slots. It is through this Host Bus Interface that the S1D13506 connects to the
PR31500/PR31700 processor.
The S1D13506 can be successfully interfaced using one of the following configurations:
• Direct connection to the PR31500/PR31700 (see Section 4, “Direct Connection to the
Philips PR31500/PR31700” on page 11).
• System design using the ITE IT8368E PC Card/GPIO buffer chip (see Section 5,
“System Design Using the IT8368E PC Card Buffer” on page 14).
S1D13506
X25B-G-009-02
Interfacing to the Philips MIPS PR31500/PR31700 Processor
Issue Date: 01/02/08
EPSON [ EPSON COMPANY ]
