EN5322QI
Output Over Load at No Load (VIN = 5 V, VOUT = 1.2 V)
CH2: VOUT, CH3: POK, CH4: IINDUCTOR
Output Over Load at 2 A Load (VIN = 5 V, VOUT = 1.2 V)
CH2: VOUT, CH3: POK, CH4: IINDUCTOR
Output Over Load at No Load (VIN = 5 V, VOUT = 1.2 V)
CH2: VOUT, CH3: POK, CH4: IINDUCTOR
Output Over Load at 2 A Load (VIN = 5 V, VOUT = 1.2 V)
CH2: VOUT, CH3: POK, CH4: IINDUCTOR
Functional Description
The EN5322 leverages advanced CMOS
impedance and excellent load transient
technology
to
provide
high
switching
response.
No
external
compensation
frequency, while also maintaining high
efficiency.
components are needed for most applications.
Output voltage is chosen from one of seven
preset values via a three-pin VID voltage select
scheme. An external divider option enables the
selection of any output voltage ≥ 0.6 V. The
VID pins can be toggled dynamically to
implement glitch-free dynamic voltage scaling
between any two VID preset values.
Packaged in a 4 mm x 6 mm x 1.1 mm QFN,
the EN5322 provides a high degree of flexibility
in circuit design while maintaining a very small
footprint. High switching frequency allows for
the use of very small MLCC input and output
filter capacitors.
The converter uses voltage mode control to
provide high noise immunity, low output
POK monitors the output voltage and signals if
it is within ±10% of nominal. Protection
©Enpirion 2008 all rights reserved, E&OE
9
www.enpirion.com
03454
4/24/2009
Rev:A