Connectivity for
Business-Critical Continuity
SMP Connectors
Assembly Instructions
SMP Hermetic Seal Installation
1. Prepare housing panel per figure 2 as shown on page 7.
2. Install solder ring on hermetic seal as shown. Recommended
ring size is .103 (2.62) ID x .128 (3.25) OD x .015 (0.38) Thick.
3. Solder in place as shown.
Interface
Full Detent
Limited Detent
Smooth Bore
Part Number
127-0711-601
127-1711-601
127-2711-601
SMP Shroud Installation
1. Install appropriate assembly tool into shroud as shown.
2. While holding tool in place, align flange mount with mounting
holes in panel. Install fasteners and torque to 6-8 in/lbs.
Shroud Part Number
127-0701-602
127-1701-602
127-2701-602
127-3701-602
Tool Part Number
127-0000-905
127-0000-906
127-0000-907
127-0000-907
18
EMERSON-NETWORKPOWER [ EMERSON NETWORK POWER ]
