EM77950
BB Controller
8.3.9 Transmit FIFO Status Register (TFSR)
This register is a read-only register. It contains the number of bytes in the TX_FIFO.
Default Value: 0x00 (TX_FIFO empty).
8.3.10 Receive FIFO Status Register (RFSR)
This register is a read-only register. It contains the number of bytes in the RX_FIFO.
Default Value: 0x00 (TR_FIFO empty).
8.3.11 Location Control Register (LCR)
This is a read and a write register.
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
SIZE
LOC 2
SIZE
LOC 1
SIZE
LOC 0
NET
LOC1
NET
LOC 0
NODE
LOC 1
NODE
LOC 0
LCR
-
Bits 0, 1: NODE_LOC [0:1]
These bits determine the location of the NODE_ID parameter in the header
(the location is specified in bytes excluding preamble). The location should be
fixed for all of different kinds of packets transferred by the system. NODE_ID
must never be set to be smaller than NET_ID, if both filters are enabled.
Location
NODE LOC 1
NODE LOC 0
2
3
4
5
0
0
1
1
0
1
0
1
Bits 2, 3: NET_LOC [0:1]
These bits determine the location of the NET_ID parameter in the header (the
location is specified in bytes excluding the Preamble). The location should be
fixed for all the different kinds of packets transferred by the system.
Location
NET LOC 1
NET LOC 0
1
2
3
4
0
0
1
1
0
1
0
1
Product Specification (V1.0) 10.09.2007
(This specification is subject to change without further notice)
• 59