EDS2532EGBH-TT
Write operation
Burst write or single write mode is selected by the OPCODE of the mode register.
1. Burst write: A burst write operation is enabled by setting OPCODE (A9, A8) to (0, 0). A burst write starts in the
same clock as a write command set. (The latency of data input is 0 clock.) The burst length can be set to 1, 2, 4
and 8, like burst read operations. The write start address is specified by the column address and the bank select
address at the write command set cycle.
CLK
tRCD
Command
Address
ACT
Row
WRIT
Column
in 0
in 0
BL = 1
in 1
in 1
in 1
BL = 2
BL = 4
BL = 8
DQ
in 3
in 0
in 0
in 2
in 2
in 5
in 6 in 7
in 3 in 4
CL = 2, 3
Burst write
2. Single write: A single write operation is enabled by setting OPCODE (A9, A8) to (1, 0). In a single write
operation, data is only written to the column address and the bank select address specified by the write
command set cycle without regard to the burst length setting. (The latency of data input is 0 clock).
CLK
tRCD
Command
WRIT
ACT
Row
Column
Address
DQ
in 0
Single write
Preliminary Data Sheet E1200E40 (Ver. 4.0)
26
ELPIDA [ ELPIDA MEMORY ]
