XBee®/XBee‐PRO® ZB SMT RF Modules
Antennas approved for use with the XBee‐PRO® RF Module
PANEL CLASS ANTENNAS for Channels 11- 25
Min. Separation
Required
Part Number
Type (Description)
Gain
Application
Cable-loss
A24-P8SF
A24-P8NF
A24-P13NF
A24-P14NF
A24-P15NF
A24-P16NF
A24-P19NF
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Flat Panel
Flat Panel
8.5 dBi
8.5 dBi
Fixed
Fixed
2 m
2 m
2 m
2 m
2 m
2 m
2 m
N/A
N/A
13.0 dBi Fixed
14.0 dBi Fixed
15.0 dBi Fixed
16.0 dBi Fixed
19.0 dBi Fixed
4.3 dB
5.3 dB
6.3 dB
7.3 dB
10.3 dB
OMNI-DIRECTIONAL ANTENNAS for Channels 11- 25
Min. Separation
Required
Part Number
Type (Description)
Gain
Application
Cable-loss
A24-F15NF
Omni-Directional (Fiberglass base station)
15.0 dBi Fixed
2 m
1 dB
YAGI CLASS ANTENNAS for Channels 11 - 25
Min. Separation
Required
Part Number
Type (Description)
Gain
Application*
Cable-loss
A24-Y6NF
A24-Y7NF
A24-Y9NF
A24-Y10NF
A24-Y12NF
A24-Y13NF
A24-Y15NF
A24-Y16NF
A24-Y16RM
A24-Y18NF
Yagi (6-element)
Yagi (7-element)
Yagi (9-element)
Yagi (10-element)
Yagi (12-element)
Yagi (13-element)
Yagi (15-element)
Yagi (16-element)
Yagi (16-element, RPSMA connector)
Yagi (18-element)
8.8 dBi
9.0 dBi
Fixed
Fixed
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
2 m
N/A
N/A
N/A
0.1 dB
1.1 dB
1.1 dB
1.6 dB
2.6 dB
2.6 dB
4.1 dB
10.0 dBi Fixed
11.0 dBi Fixed
12.0 dBi Fixed
12.0 dBi Fixed
12.5 dBi Fixed
13.5 dBi Fixed
13.5 dBi Fixed
15.0 dBi Fixed
* If using the RF module in a portable application (for example - if the module is used in a handheld device and the antenna is less than 20cm from
the human body when the device is in operation): The integrator is responsible for passing additional SAR (Specific Absorption Rate) testing based on
FCC rules 2.1091 and FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields, OET Bulletin and Supplement C. The testing
results will be submitted to the FCC for approval prior to selling the integrated unit. The required SAR testing measures emissions from the module and
how they affect the person.
RF Exposure
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of
20 cm or more should be maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance are not recommended. The antenna used for this
transmitter must not be co-located in conjunction with any other antenna or transmitter.
The preceding statement must be included as a CAUTION statement in OEM product manuals in order to alert users of FCC RF Exposure compliance.
Europe (ETSI)
The XBee RF Modules (excluding the PRO) have been certified for use in several European countries. For a
complete list, refer to www.digi.com
If the XBee RF Modules are incorporated into a product, the manufacturer must ensure compliance of the
final product to the European harmonized EMC and low-voltage/safety standards. A Declaration of
Conformity must be issued for each of these standards and kept on file as described in Annex II of the
R&TTE Directive.
Furthermore, the manufacturer must maintain a copy of the XBee user manual documentation and ensure
the final product does not exceed the specified power ratings, antenna specifications, and/or installation
requirements as specified in the user manual. If any of these specifications are exceeded in the final
product, a submission must be made to a notified body for compliance testing to all required standards.
© 2010 Digi International, Inc.
144