DM9010BI
Industrial-temperature Single Chip Ethernet Controller with General Processor Interface
3. FEATURES
■
■
100-pin LQFP.
■
Supports automatically load vendor ID and
Supports processor interface: Byte/word/Dword of
I/O command to internal memory data operation
Integrated 10/100M transceiver with
HP Auto-MDIX
Supports MII and reverses MII interface
Supports back pressure mode for half-duplex
mode flow control
IEEE802.3x flow control for full-duplex mode
Supports wakeup frame, link status change and
magic packet events for remote wake up
product ID from EEPROM
Supports 7 or 23 GPIO pins
Optional EEPROM configuration
Very low power consumption mode:
■
■
■
■
■
■
–
–
–
Power reduced mode (cable detection)
Power down mode
Selectable TX drivers for 1:1 or 1.25:1
transformers for additional power reduction.
1: 1 transformers only when HP Auto-MDIX
Enable.
■
■
–
■
Integrated 16K Byte SRAM
■
■
Supports Industrial-temperature: -40 °C.~ +85°C
■
■
Build in 3.3V to 1.8V regulator
Supports early Transmit
Compatible with 3.3V and 5.0V tolerant I/O
■
Supports IP/TCP/UDP checksum generation and
checking
Preliminary
6
Version: DM9010BI--DS-P01
January 12, 2010