欢迎访问ic37.com |
会员登录 免费注册
发布采购

DS2152L 参数 Datasheet PDF下载

DS2152L图片预览
型号: DS2152L
PDF下载: 下载PDF文件 查看货源
内容描述: 增强型T1单芯片收发器 [Enhanced T1 Single-Chip Transceiver]
分类和应用: 电信集成电路
文件页数/大小: 94 页 / 1000 K
品牌: DALLAS [ DALLAS SEMICONDUCTOR ]
 浏览型号DS2152L的Datasheet PDF文件第22页浏览型号DS2152L的Datasheet PDF文件第23页浏览型号DS2152L的Datasheet PDF文件第24页浏览型号DS2152L的Datasheet PDF文件第25页浏览型号DS2152L的Datasheet PDF文件第27页浏览型号DS2152L的Datasheet PDF文件第28页浏览型号DS2152L的Datasheet PDF文件第29页浏览型号DS2152L的Datasheet PDF文件第30页  
DS2152  
CCR4: COMMON CONTROL REGISTER 4 (Address=11 Hex)  
(MSB)  
(LSB)  
TIRFS  
RSRE  
RPCSI  
RFSA1  
RFE  
RFF  
THSE  
TPCSI  
SYMBOL POSITION NAME AND DESCRIPTION  
RSRE  
CCR4.7  
Receive Side Signaling Reinsertion Enable. See Section 7.2 for  
details.  
0 = do not re-insert signaling bits into the data stream presented at  
the RSER pin  
1 = re-insert the signaling bits into data stream presented at the  
RSER pin  
RPCSI  
CCR4.6  
Receive Per-Channel Signaling Insert. See Section 7.2 for more  
details.  
0 = do not use RCHBLK to determine which channels should have  
signaling re-inserted  
1 = use RCHBLK to determine which channels should have  
signaling re-inserted  
RFSA1  
RFE  
CCR4.5  
CCR4.4  
Receive Force Signaling All 1s. See Section 7.2 for more details.  
0 = do not force extracted robbed-bit signaling bit positions to a 1  
1 = force extracted robbed-bit signaling bit positions to a 1  
Receive Freeze Enable. See Section 7.2 for details.  
0 = no freezing of receive signaling data will occur  
1 = allow freezing of receive signaling data at RSIG (and RSER if  
CCR4.7 = 1).  
RFF  
CCR4.3  
CCR4.2  
Receive Force Freeze. Freezes receive side signaling at RSIG (and  
RSER if CCR4.7=1); will override Receive Freeze Enable (RFE).  
See Section 7.2 for details.  
0 = do not force a freeze event  
1 = force a freeze event  
THSE  
Transmit Hardware Signaling Insertion Enable. See Section 7.2  
for details.  
0 = do not insert signaling from the TSIG pin into the data stream  
presented at the TSER pin  
1 = insert the signaling from the TSIG pin into data stream presented  
at the TSER pin  
TPCSI  
TIRFS  
CCR4.1  
CCR4.0  
Transmit Per-Channel Signaling Insert. See Section 7.2 for  
details.  
0 = do not use TCHBLK to determine which channels should have  
signaling inserted from TSIG  
1 = use TCHBLK to determine which channels should have  
signaling inserted from TSIG  
Transmit Idle Registers (TIR) Function Select. See Section 8 for  
timing details.  
0 = TIRs define in which channels to insert idle code  
1 = TIRs define in which channels to insert data from RSER (i.e.,  
Per-Channel Loopback function)  
26 of 93  
 复制成功!