3.1 FUNCTUON
This packet indicates the measurement mode of the meter. The following table
summarizes the transmitted code for each mode. Note that the encoding of this packet is
different from the encoding of FC1-FC5 switch.
Code
Measurement Mode
Voltage
0111011
0111101
0111111
0110000
0111001
0110011
0110101
0110001
0110010
0110110
0110100
0111110
Auto µA Current
Auto mA Current
11 A current
Manual A Current
Ω
Continuity
Diode
Frequency
Capacitance
*Temperature
ADP
*The judge bit in the Status packet determines whether the unit is Celsius or Fahrenheit.
3.2 RANGE
This packet indicates the full-scale range of the meter. When the meter operates in
continuity mode or diode mode, this packet is always 0110000 since the full-scale
ranges in these modes are fixed. The following table lists the code for each range in
each measurement mode.
Code
V
Auto mA Auto µA 11 A Manual A ADP
Ω
Frequency Capacitor
1111Hz 11.000nF
0110000 1.1000V 11.000mA 110.00µA
1.1000A ADP4 110.00Ω
0110001 11.000V 110.00mA 1100.0µA 11.000 A 11.000A ADP3 1.1000KΩ
-
110.00nF
0110010 110.00V
0110011 1100.0V
0110100 110.00mV
0110101
110.00A ADP2 11.000KΩ 11.000KHz 1.1000µF
1100.0A ADP1 110.00KΩ 110.00KHz 11.000µF
11000A ADP0 1.1000MΩ 1.1000MHz 110.00µF
11.000MΩ 11.000MHz 1.1000mF
0110110
110.0MΩ 110.00MHz 11.000mF
0110111
110.00mF
v1.2
21
11/09/06