ES51985
6000 Count AUTO DMM
(AC/DC)
Auto A(DC/AC)
600.0mA
R2 → R1
R1 → R2,
R2 → R1
fixed
R1 – R2
6.000A – 60.00A
60.00A
6.000A
60.00A
Manual A(DC/AC)
fixed
ORi
→
Ω
OR1- OR6 ORi
+
1,
600.0Ω – 60.00MΩ
600.0Ω
OR6 → OR1
fixed
Continuity
Diode
Frequency
fixed
fixed
FR1 – FR5
600.0Ω
6.000V
6.000KHz –
60.00MHz
600.0Ω
6.000V
6.000KHz
fixed
FRi→ FRi+1
FR5→ FR1
Note: Pushing RANGE resets all existing special modes.
3.3 KEY
See Section “Measurement Mode Switching” for the function of this pin.
3.4 Max/Min + HOLD
Original state
(Automatic/manual)
1 push>1 sec
1 push<1 sec
1 push>1 sec
1 push<1 sec
“MAX” active
“MIN” active
min value
max value
Push HOLD
Push HOLD
“MAX”&”H” active
held max value.
“MIN”&”H” active
held min value.
1 push<1 sec
The meter displays the maximum or minimum value of the input in MAX/MIN mode.
When MAX/MIN is pressed for the first time, the meter displays the maximum value.
When MAX/MIN is pressed again, the meter displays the minimum value. When
MAX/MIN is pressed for the third time, the meter displays max value. The meter
returns to normal operation if MAX/MIN is pressed and held for longer than one
second. Pressing HOLD in MAX/MIN mode makes the meter stop updating the
maximum or the minimum value.
11
07/01/02