ES51964(6600counts)
Dual Display
4.4. REL + HOLD
In REL mode, the main-display shows DN+K - DN(relative value), where N = 1, 2,
3, … ,and the DN value is shown on sub-display. DN(reference value) is the last value
before REL is pushed, and DN+K is the current value. The meter returns to normal operation
if REL is pressed again. Pressing HOLD in REL mode makes the meter stop updating the
LCD panel.
push REL
push HOLD
Original State
(Auto/Manual)
〝REL〞active.
〝REL〞and〝H〞active.
The relative value
Hold the relative value
push REL
push HOLD
Note: It’s possible that relative value exceeds 6,600 or –6,600 counts, but never exceeds
9,999 or –9,999 counts. Such relative values are displayed. The LCD shows OL in REL
mode only if DN or DN+K is more than 6,600 counts or the relative value is more than 9,999.
4.5. Max/Min + HOLD
The meter displays maximum or minimum value of input in Max/Min mode. When
Max/Min is pressed for the first time, sub-display shows maximum value. Sub-display
shows minimum value, when it is pressed again. Main-display always shows current value
in Max/Min mode. The meter returns to normal operation if Max/Min is pressed and held
for longer than one second. Pressing HOLD in Max/Min mode makes the meter stop
updating the maximum or the minimum value.
Original state
(Automatic/manual)
1 push<1s
1 push>1s
1 push>1 sec
1push<1s
“MIN” active
min value
“MAX” active
max value
1push<1s
Push HOLD
Push HOLD
“MIN” “H” active
hold min value.
“MAX” “H” active
hold max value.
1push<1s
1push<1s
v2.5
18
09/04/14
CYRUSTEK [ Cyrustek corporation ]
