PLC LV Evaluation Board
Figure 3-5. Transmit Amplifier Schematic
3.4
Setting Up the PLC LV Board
This section describes the components of the PLC evaluation board, the process of setting manual
2
2
addresses on the PLC LV board and the connection of USB-I2C Bridge and I C cable to the I C
header on the board.
2
3.4.1
I C Header Settings
J8 is a five-pin header that can be used for communicating with an external board, powering an
external board, and resetting the CY8CPLC10 device from an external board. A five wire ribbon
cable provided with the CY3273 kit can be used to connect to J8. The following table describes the
J8 header pins.
CY3273 Cypress Low Voltage Powerline Communication Evaluation Kit Guide, Doc. # 001-55382 Rev. *C
23
[+] Feedback
CYPRESS [ CYPRESS ]
