EnerChip CC CBC3150
Real-Time Clock Application Circuit
The EnerChip CC as depicted in Figure 10 is a typical application circuit in a 3.3 volt system where backup and
power switchover circuitry for a real-time clock device is provided.
Figure 10: EnerChip CC Providing Real-Time Clock Backup Power
Adding Power and Energy Capacity with Parallel EnerChips
In some applications, additional energy storage capacity might be needed. The schematic in Figure 11 shows
how multiple EnerChips can be supported in parallel by a single EnerChip CC CBC3150. Note that CFLY should
be increased by 0.1µF for every additional EnerChip.
Figure 11: EnerChip CC Providing Power Management for Multiple EnerChips
©2009-2010 Cymbet Corporation • Tel: +1-763-633-1780 • www.cymbet.com
DS-72-03 Rev C
Page 12 of 15
CYMBET [ CYMBET CORPORATION ]
