Analogue Control Interface
FX839
Notes: 3.
R
= 5kΩ AV = 5.0V.
LOAD DD
4. At V
= 5.0V only. The ‘C-BUS’ clock must be at least 4 times slower than this xtal/clock
DD
frequency.
5. Differential non-linearity is defined as the difference in width between adjacent code midpoints
and the width of an ideal LSB, divided by the width of an ideal LSB.
6. Integral non-linearity is defined as the width difference between an actual code midpoint and
the line of best fit through all code midpoints, divided by the width of an ideal LSB.
Consumer Microcircuits Limited
19
1997
D/839/4
CMLMICRO [ CML MICROCIRCUITS ]
