BMA253
Data sheet
Page 90
Register 0x38 (OFC_OFFSET_X)
Contains the offset compensation value for x-axis acceleration readout data.
Name
Bit
0x38
7
OFC_OFFSET_X
6
5
4
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
offset_x<7:4>
3
Bit
2
1
0
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
offset_x<3:0>
offset_ x<7:0>:
offset value, which is subtracted from the internal filtered and unfiltered x-
axis acceleration data; the offset value is represented with two’s complement
notation, with a mapping of +127 +0.992g, 0 0 g, and -128 -1 g; the
scaling is independent of the selected g-range; the content of the
offset_x<7:0> may be written to the NVM; it is automatically restored from
the NVM after each power-on or softreset; offset_x<7:0> may be written
directly by the user; it is generated automatically after triggering the fast
offset compensation procedure for the x-axis
BST-BMA253-DS000-01 | Revision 1.0 | August 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.