BMA253
Data sheet
Page 53
Register 0x05 (ACCD_Y_MSB)
The register contains the most-significant bits of the Y-channel acceleration readout value.
When reading out Y-channel acceleration values, data consistency is guaranteed if the
ACCD_Y_LSB is read out before the ACCD_Y_MSB and shadow_dis=’0’. In this case, after the
ACCD_Y_LSB has been read, the value in the ACCD_Y_MSB register is locked until the
ACCD_Y_MSB has been read. This condition is inherently fulfilled if a burst-mode read access
is performed. Acceleration data may be read from register ACCD_Y_MSB at any time except
during power-up and in DEEP_SUSPEND mode.
Name
Bit
0x05
7
ACCD_Y_MSB
6
5
4
Read/Write
R
R
R
R
Reset
n/a
n/a
n/a
n/a
Value
Content
acc_y_msb<11:8>
Bit
3
2
1
0
Read/Write
Reset
R
n/a
R
n/a
R
n/a
R
n/a
Value
Content
acc_y_msb<7:4>
acc_y_msb<11:4>: Most significant 8 bits of acceleration read-back value (two’s-complement
format)
BST-BMA253-DS000-01 | Revision 1.0 | August 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.