ABSOLUTE MAXIMUM RATINGS
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper han-
dling and installation procedures can cause damage.
VDD to GND ........................................................................... –0.3V to +6V
Input Current ............................................................... 100mA, Momentary
Input Current ................................................................. 10mA, Continuous
Voltage to GND, VIN+, VIN– ........................................ –0.3V to VDD + 0.3V
Voltage to GND, SDA, SCL .....................................................–0.5V to 6V
Maximum Junction Temperature ................................................... +150°C
Operating Temperature .................................................... –40°C to +85°C
Storage Temperature ...................................................... –60°C to +150°C
Lead Temperature (soldering, 10s) ............................................... +300°C
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
NOTE: (1) Stresses above those listed under “Absolute Maximum Ratings” may
cause permanent damage to the device. Exposure to absolute maximum
conditions for extended periods may affect device reliability.
PACKAGE/ORDERING INFORMATION
SPECIFIED
PACKAGE
PACKAGE-LEAD DESIGNATOR(2)
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
PRODUCT
I2C ADDRESS(1)
ADS1100
1001 000
SOT23-6
DBV
–40°C to +85°C
BAAI
ADS1100IDBVT
Tape and Reel, 250
"
"
"
"
"
"
ADS1100IDBVR Tape and Reel, 3000
NOTES: (1) Contact TI or your local sales representative for more information on the availability of other addresses. (2) For the most current specifications and
package information, refer to our web site at www.ti.com.
PIN CONFIGURATION
Top View
SOT
VIN– VDD
SDA
4
6
5
BAAI
1
2
3
VIN+ GND SCL
NOTE: Marking text direction indicates pin 1.
ADS1100
2
SBAS239
www.ti.com