欢迎访问ic37.com |
会员登录 免费注册
发布采购

90USB82-16MU 参数 Datasheet PDF下载

90USB82-16MU图片预览
型号: 90USB82-16MU
PDF下载: 下载PDF文件 查看货源
内容描述: 8位微控制器具有ISP功能的Flash 8 / 16K字节 [8-bit Microcontroller with 8/16K Bytes of ISP Flash]
分类和应用: 微控制器和处理器外围集成电路异步传输模式ATM时钟
文件页数/大小: 306 页 / 2299 K
品牌: ATMEL [ ATMEL ]
 浏览型号90USB82-16MU的Datasheet PDF文件第110页浏览型号90USB82-16MU的Datasheet PDF文件第111页浏览型号90USB82-16MU的Datasheet PDF文件第112页浏览型号90USB82-16MU的Datasheet PDF文件第113页浏览型号90USB82-16MU的Datasheet PDF文件第115页浏览型号90USB82-16MU的Datasheet PDF文件第116页浏览型号90USB82-16MU的Datasheet PDF文件第117页浏览型号90USB82-16MU的Datasheet PDF文件第118页  
The Timer/Counter Overflow Flag (TOVn) is set according to the mode of operation selected by  
the WGMn3:0 bits. TOVn can be used for generating a CPU interrupt.  
15.5 Input Capture Unit  
The Timer/Counter incorporates an input capture unit that can capture external events and give  
them a time-stamp indicating time of occurrence. The external signal indicating an event, or mul-  
tiple events, can be applied via the ICPn pin or alternatively, for the Timer/Counter1 only, via the  
Analog Comparator unit. The time-stamps can then be used to calculate frequency, duty-cycle,  
and other features of the signal applied. Alternatively the time-stamps can be used for creating a  
log of the events.  
The Input Capture unit is illustrated by the block diagram shown in Figure 15-3. The elements of  
the block diagram that are not directly a part of the input capture unit are gray shaded. The small  
“n” in register and bit names indicates the Timer/Counter number.  
Figure 15-3. Input Capture Unit Block Diagram  
DATA BUS (8-bit)  
TEMP (8-bit)  
ICRnH (8-bit)  
ICRnL (8-bit)  
TCNTnH (8-bit)  
TCNTnL (8-bit)  
ICRn (16-bit Register)  
TCNTn (16-bit Counter)  
WRITE  
ACO*  
ACIC*  
ICNC  
ICES  
Analog  
Comparator  
Noise  
Canceler  
Edge  
Detector  
ICFn (Int.Req.)  
ICPn  
Note:  
The Analog Comparator Output (ACO) can only trigger the Timer/Counter1 ICP – not  
Timer/Counter3, 4 or 5.  
When a change of the logic level (an event) occurs on the Input Capture Pin (ICPn), alternatively  
on the analog Comparator output (ACO), and this change confirms to the setting of the edge  
detector, a capture will be triggered. When a capture is triggered, the 16-bit value of the counter  
(TCNTn) is written to the Input Capture Register (ICRn). The Input Capture Flag (ICFn) is set at  
the same system clock as the TCNTn value is copied into ICRn Register. If enabled (TICIEn =  
1), the input capture flag generates an input capture interrupt. The ICFn flag is automatically  
cleared when the interrupt is executed. Alternatively the ICFn flag can be cleared by software by  
writing a logical one to its I/O bit location.  
114  
AT90USB82/162  
7707D–AVR–07/08  
 复制成功!