AS1543/44
Data Sheet - Package Drawings and Markings
10 Package Drawings and Markings
The device is available in an TQFN(4x4)-20 package.
Figure 36. TQFN(4x4)-20 Package
Symbol
Min
Typ
4.00
4.00
2.15
2.15
0.55
0.25
0.5
Max
Notes
1, 2
Symbol
A
Min
0.70
0.00
Typ
0.75
0.02
REF
Max
0.80
0.05
Notes
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
1, 2
D BSC
E BSC
1, 2
A1
D2
E2
L
2.00
2.00
0.45
0.18
2.25
2.25
0.65
0.30
1, 2
A3
1, 2
L1
0.03
0.15
1, 2
aaa
bbb
ccc
ddd
0.10
0.10
0.10
0.05
b
1, 2, 5
e
N
20
1, 2
ND
5
1, 2, 5
Notes:
1. Dimensioning and tolerancing conform to ASME Y14.5M-1994.
2. All dimensions are in millimeters, angle is in degrees.
3. N is the total number of terminals.
4. Terminal #1 identifier and terminal numbering convention shall conform to JESD 95-1 SPP-012. Details of ter-
minal #1 identifier are optional, but must be located within the area indicated. The terminal #1 identifier may be
either a mold, embedded metal or mark feature.
5. Dimension b applies to metallized terminal and is measured between 0.15 and 0.30mm from terminal tip.
6. ND refers to the maximum number of terminals on D side.
7. Unilateral coplanarity zone applies to the exposed heat sink slug as well as the terminals.
www.austriamicrosystems.com
Revision 1.00
27 - 29