Note (6) TOP is a conservative engineering estimate. It is based on measurements of similar CIS
modules and simple bench top tests using heat guns and freeze sprays. These will be
re-measured during the pilot production under the standard QA practices that is under
control of ISO 9000.
6.0 ELECTRO-OPTICAL CHARACTERISTICS
TABLE 6.1 ELECTRO-OPTICAL CHARACTERISTICS (25O C)
PARAMETER
SYMBOL
PARAMETER
UNITS
NOTE
NUMBER OF ACTIVE
PHOTO DETECTORS
7680
elements
PIXEL-TO-PIXEL SPACING
LINE SCANNING RATE
43.25
192
µm
µs/line
TINT (1)
@ 5.0 MHz
clock
frequency,
see note 1.
Maximum
CLOCK FREQUENCY
FREQ (2)
6.0
MHz
clock
frequency,
see note 2.
See Note 3
for definition
See Note 3
for definition
See Note 3
for definition
Green light,
Exposure=X
XXXXµJ/cm2
RED RESPONSIVITY
GREEN RESPONSIVITY
BLUE RESPONSIVITY
ExpR (3)
ExpG (3)
ExpB (3)
70
55
35
3.0
V/µJ/cm2
V/µJ/cm2
V/µJ/cm2
Volts
BRIGHT OUTPUT VOLTAGE Vpavg (4)
BRIGHT OUTPUT NON-
UNIFORMITY
Up (5)
<7
%
Depends on
optical
System.
See note 5
ADJACENT PIXEL
NONUNIFORMITY
BRIGHT OUTPUT
Uadj (6)
<10
<10
%
%
Uptotal (7)
Depends on
the optical
system, see
note 5
NONUNIFORMITY TOTAL
DARK NONUNIFORMITY
DARK VIDEO OFFSET
RANDOM NOISE
Ud (8)
<25
-2.0
<11.8
<3.0
>70
mV
Vd (9)
Volts
p-p mV
rms mV
%
RNL (10)
MODULATION TRANSFER
FUNCTION
MTF (11)
Sensor only
see note 11
PAGE 5 OF 22 - PI616MC-AS, 12/20/02
AMI [ AMI SEMICONDUCTOR ]
