D A T A S H E E T
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
V
(Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V
CC
Plastic Packages . . . . . . . . . . . . . . . –65°C to +150°C
A9, OE#, and RESET# (Note 2) . –0.5 V to +12.5 V
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . –65°C to +125°C
All other pins (Note 1) . . . . . . . –0.5 V to V +0.5 V
CC
Output Short Circuit Current (Note 3) . . . . . . . 200 mA
Voltage with Respect to Ground
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V to –2.0 V
SS
for periods of up to 20 ns. See Figure 7. Maximum DC voltage on input or I/O pins is VCC +0.5 V. During voltage transitions,
input or I/O pins may overshoot to V +2.0 V for periods up to 20 ns. See Figure 8.
CC
2. Minimum DC input voltage on pins A9, OE#, and RESET#
is -0.5 V. During voltage transitions, A9, OE#, and RESET#
3. No more than one output may be shorted to ground at a
time. Duration of the short circuit should not be greater than
one second.
may overshoot V to –2.0 V for periods of up to 20 ns. See
SS
Figure 7. Maximum DC input voltage on pin A9 is +12.5 V
which may overshoot to 14.0 V for periods up to 20 ns.
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections
of this data sheet is not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect
device reliability.
22358B7 May 5, 2006
Am29LV160D
29