D A T A S H E E T
REVISION SUMMARY
Revision A (December 1998)
Revision A+5 (July 23, 1999)
Initial release.
Global
Added 90 ns speed option.
Revision A+1 (January 1999)
Revision A+6 (September 1, 1999)
Distinctive Characteristics
WP#/ACC pin: In the third subbullet, deleted reference
AC Characteristics
to increased erase performance.
Hardware Reset (RESET#) table: Deleted tRPD specifi-
cation. Erase/Program Operations table: Deleted tOES
specification.
Device Bus Operations
Accelerated Program and Erase Operations: Deleted
all references to accelerated erase.
Revision A+7 (September 7, 1999)
Sector/Sector Block Protection and Unprotection:
Changed section name and text to include tables and
references to sector block protection and unprotection.
Distinctive Characteristics
Ultra low power consumption bullet: Corrected values
to match those in the DC Characteristics table.
AC Characteristics
AC Characteristics
Accelerated Program Timing Diagram: Deleted refer-
ence in title to accelerated erase.
Alternate CE# Controlled Erase/Program Operations:
Deleted tOES specification.
Revision A+2 (March 23, 1999)
Connection Diagrams
Revision B (December 14, 1999)
AC Characteristics—Figure 17. Program
Operations Timing and Figure 18. Chip/Sector
Erase Operations
Corrected the TSOP pinout on pins 13 and 14.
Revision A+3 (April 12, 1999)
Global
Deleted tGHWL and changed OE# waveform to start at
high.
Modified the description of accelerated programming to
emphasize that it is intended only to speed in-system
programming of the device during the system produc-
tion process.
Physical Dimensions
Replaced figures with more detailed illustrations.
Revision C (February 21, 2000)
Distinctive Characteristics
Removed “Advance Information” designation from data
sheet. Data sheet parameters are now stable; only
speed, package, and temperature range combinations
are expected to change in future revisions.
Secured Silicon (SecSi) Sector bullet: Added the 8-byte
unique serial number to description.
Device Bus Operations table
Modified Note 3 to indicate sector protection behavior
when VIH is asserted on WP#/ACC. Applied Note 3 to
the WP#/ACC column for write operations.
Device Bus Operations table
Changed standby voltage specification to VCC 0.2 V.
Standby Mode
Ordering Information
Changed standby voltage specification to VCC 0.2 V.
Added the “N” designator to the optional processing
section.
DC Characteristics table
Changed test conditions for ICC3, ICC4, ICC5 to VCC 0.2
V.
Secured Silicon (SecSi) Sector Flash Memory
Region
Modified explanatory text to indicate that devices now
have an 8-byte unique ESN in addition to the 16-byte
random ESN. Added table for address range
clarification.
Revision C+1 (November 14, 2000)
Global
Added dash to speed options and OPNs. Added table
of contents.
Revision A+4 (May 14, 1999)
Global
AC Characteristics—Read Operations
Changed tDF to 16 ns for all speeds.
Deleted all references to the unique ESN.
January 23, 2007 21635C5
Am29SL160C
49