Revision 1.02 – June 27, 2006
S5935 – PCI Product
Data Book
This register is only accessible when Add-On initiated
bus mastering is enabled.
ADD-ON CONTROLLED BUS MASTER
WRITE TRANSFER COUNT REGISTER
(MWTC)
The master write transfer count register is used to con-
vey to the S5935 controller the actual number of bytes
that are to be transferred. The value in this register is
decremented with each bus master PCI write opera-
tion until the transfer count reaches zero.
Master Write Transfer Count
58h
Register Name
Add-On
Address Offset
Upon reaching zero, the transfer operation ceases and
an interrupt may be optionally generated to either the
PCI or Add-On bus interface. Transfers which are not
whole multiples of DWORDs in size result in a partial
word ending cycle. This partial word ending cycle is
possible since all bus master transfers for this control-
ler are required to begin on a DWORD boundary.
00000000h
Read/Write
32 bits
Power-up value
Attribute
Size
Figure 37. Add-On Controlled Bus Master Write Transfer Count Register
31
26 25
0
Bit
Value
00
Transfer Count
in Bytes (R/W)
Reserved = O's (RO)
AMCC Confidential and Proprietary
DS1527
89
AMCC [ APPLIED MICRO CIRCUITS CORPORATION ]
