Revision 5.01 – November 30, 2005
S5335 – PCI Bus Controller, 3.3V
Data Sheet
Add-On Interrupt Control/status Register (AINT)
This register provides the method for choosing which
conditions are to produce an interrupt on the Add-On
bus interface, a method for viewing the cause for the
interrupt, and a method for acknowledging (removing)
the interrupt’s assertion.
Add-On Interrupt Control and
Status
Register Name:
38h
Add-On Address Offset:
Power-up value:
Attribute:
Interrupt sources:
00000000h
•
One of the Incoming mailboxes (1,2,3 or 4)
becomes full.
Read/Write, Read/
Write_One_Clear
•
One of the Outgoing mailboxes (1,2,3 or 4)
becomes empty.
32 bits
Size:
•
•
•
•
Built-in self test issued.
Write Transfer Count = zero
Read Transfer Count = zero
Target/Master Abort
Figure 35. Add-On Interrupt Control/Status Register
Interrupt Status
Interrupt Selection
Bit
0
16 1514 12
0
8
4
31
2423 2120191817
0 0 0 0 0 0 0 0
0
0 0 0
Value
Interrupt Asserted (RO)
Interrupt Source (R/W)
Enable & Selection
Bus Mastering
Error Interrupt (R/WC)
D4-D0 Incoming Mailbox
(Becomes Full)
BIST (R/WC)
D4=Enable Interrrupt
D3-D2=Mailbox #
Read Transfer
Complete (R/WC)
Write Transfer
0 0=Mailbox 1
0 1=Mailbox 2
1 0=Mailbox 3
1 1=Mailbox 4
Complete (R/WC)
Outgoing Mailbox
Interrupt (R/WC)
D0-D1=Byte #
Incoming Mailbox
Interrupt (R/WC)
0 0=Byte 0
0 1=Byte 1
1 0=Byte 2
1 1=Byte 3
D12-D8 Outgoing Mailbox (R/W)
(Goes empty)
D12=Enable Interrupt
D11-D10=Mailbox
0 0=Mailbox 1
0 1=Mailbox 2
1 0=Mailbox 3
1 1=Mailbox 4
D9-D8=Byte #
0 0=Byte 0
0 1=Byte 1
1 0=Byte 2
1 1=Byte 3
Interrupt on Write
Transfer Complete
Interrupt on Read
Transfer Complete
AMCC Confidential and Proprietary
DS1657 77
AMCC [ APPLIED MICRO CIRCUITS CORPORATION ]
