QT2022/32 - Data Sheet: DS3051
WIS_EXT_ALARM
WIS_EXT_ALARM is used to indicate that a WAN-related fault has occurred on the receive path.
WIS_EXT_ALARM is the bitwise OR of the WIS Extended Alarms Status Register bits in register 2.C502h.
WIS_EXT_ALARM can be programmed to assert only when specific receive path fault conditions are present. The
programming is performed by writing to a mask register at address 2.C501h. The contents of register 2.C502h is
AND’ed with register 2.C501h prior to application of the OR function to generate the WIS_ALARM signal.
tWIS_ALARM = {OR of (reg 2.C501h.n ‘bit wise AND’ reg 2.C502.n) for n=0..11}
Table 29: WIS Extended Alarms Status Register (WIS_EXT_ALARM)
MDIO Status Register
(RO)
MDIO Enable Register (R/W)
Description
K1 Validated Byte Flag
K2 Validated Byte Flag
Definition
16b hex
2.C502.0
type
RO/LH
16b hex
2.C501.0
2.C501.1
2.C501.2
default value
Incorrect K1 Validated Byte
Incorrect K2 Validated Byte
0
2.C502.1
2.C502.2
RO/LH
RO/LH
0
0
Received Inconsistent K1 Bytes
Flag
Received Inconsistent K1
Bytes
Received Inconsistent K2 Bytes
Flag
Received Inconsistent K2
Bytes
2.C502.3
RO/LH
2.C501.3
0
S1 Validated Byte Flag
Reserved
Incorrect S1 Validated Byte
Reserved
2.C502.4
2.C502.5
2.C502.6
RO/LH
RO
2.C501.4
2.C501.5
2.C501.6
0
0
0
Received New J0 Trace Message
Mismatch Flag
New J0 Trace Message
detected
RO/LH
Received J0 Trace Mismatch
Received New J1 Trace Message
Mismatch Flag
New J1 Trace Message
detected
2.C502.7
RO/LH
2.C501.7
0
Received J1 Trace Mismatch
SD Alarm Flag
Detected Signal Degrade
Alarm
2.C502.8
2.C502.9
RO/LH
RO/LH
2.C501.8
2.C501.9
0
0
SD Timing Window Expired Flag
Signal Degrade Timing
Window Expired
SF Alarm Flag
Detected Signal Fail Alarm
2.C502.a
2.C502.b
RO/LH
RO/LH
2.C501.a
2.C501.b
0
0
SF Timing Window Expired Flag
Signal Fail Timing Window
Expired Flag
Reserved
2.C502.f:c
RO
2.C501.f:c
0
68
AppliedMicro - Confidential & Proprietary
Revision 5.11