Revision 1.09 - August 21, 2007
PPC405EX – PowerPC 405EX Embedded Processor
Preliminary Data Sheet
Ratings and Specifications
Table 7. Absolute Maximum Ratings
The absolute maximum ratings below are stress ratings only. Operation at or beyond these maximum ratings can cause
permanent damage to the device. None of the performance specification contained in this document are guaranteed when
operating at these maximum ratings.
Characteristic
Supply Voltage (Internal Logic)
Symbol
Value
0 to +1.6
Unit
V
Notes
VDD
AVDD
AHVDD
OVDD
SVDD
EOVDD
SAVDD
EAVDD
VIN
Core SerDes Analog Supply Voltage
PLL SerDes Analog Supply Voltage
I/O Supply Voltage
0 to +1.6
V
1
1
0 to +2.6
V
0 to +3.6
V
SDRAM DDR1(2) Supply Voltage
CMOS Supply Voltage
0 to +2.6 (+1.9)
0 to +2.6
V
V
System PLL Analog Supply Voltage
Ethernet PLL Analog Supply Voltage
Input Voltage (3.3V LVTTL receivers)
Storage Temperature Range
0 to +2.6
V
1
1
0 to +2.6
V
0 to +3.6
V
TSTG
−55 to +150
−40 to +120
−40 to +125
°C
°C
°C
TC
Case Temperature Range under bias
Junction Temperature Range
TJMax
1. The analog voltages can be derived from the +1.2V and +2.5V supplies, but must be filtered as shown below before entering
the PPC405EX. Use a separate filter for each voltage. This circuit can be used for AVDD, AHVDD , SAVDD, and EAVDD. Use
AGND with AVDD and AHVDD. Use SAGND with SAVDD. Use EAGND with EAVDD. These analog grounds must be brought
out and connected to the digital ground plane at the filter capacitor. Keep all wire lengths as short as possible.
V
AV
DD
DD
L1 – Murata BLM18AG121SN1D
L1
C1
C1 – 0.1 μF ceramic
AGND
GND
AMCC Proprietary
45