S3170 – 2.5 Gbps Transimpedance Amplifier
Revision A – August 12, 2004
Data Sheet
Table 2. Recommended Operating Conditions
Parameter
Ambient Temperature, T
A
Junction Operating Temperature, T
J
Voltage on V
CC
with respect to GND
Min
-40
-20
3.135
3.3
Typ
Max
+85
+105
3.465
Units
°C
°C
V
Table 3. Absolute Maximum Ratings
The following are the absolute maximum stress ratings for the S3170. Stresses beyond those listed may cause permanent damage to the
device. Absolute maximum ratings are stress ratings only and operation of the device at the maximums stated or any other conditions beyond
those indicated in the "Recommended Operating Conditions" of this document are not inferred. Exposure to absolute maximum rating condi-
tions for extended periods may affect device reliability.
Parameter
Voltage on V
CC
with respect to GND
Voltage on all Other Pads
Storage Temperature Range
Min
-0.5
-0.5
-55
Typ
Max
4
V
CC
+0.3
150
Units
V
V
°C
Electrostatic Discharge (ESD) Sensitivity Rating - Human Body Model (HBM):
The S3170 is rated to the following ESD voltages based upon JEDEC standard: JESD22-A114-B
CLASS 0 - All pins are rated at or above 1000 volts except pins I
IN
, OUTP and OUTN. OUTP and OUTN are rated at 500 V and I
IN
is rated
to 100 volts.
Adherence to standards for ESD protection should be taken during the handling of the devices to ensure that the devices are not dam-
aged. The standards to be used are defined in ANSI standard ANSI/ESD S20.20-1999, "Protection of Electrical and Electronic Parts,
Assemblies and Equipment." Contact your local FAE or sales representative for applicable ESD application notes
AMCC Confidential and Proprietary
5
AMCC [ APPLIED MICRO CIRCUITS CORPORATION ]
