FLEX 6000 Programmable Logic Device Family Data Sheet
The interleaved LAB structure—an innovative feature of the FLEX 6000
architecture—allows each LAB to drive two local interconnects. This
feature minimizes the use of the FastTrack Interconnect, providing higher
performance. An LAB can drive 20 LEs in adjacent LABs via the local
interconnect, which maximizes fitting flexibility while minimizing die
size. See Figure 2.
Figure 2. Logic Array Block
The row interconnect is
bidirectionally connected LEs can directly drive the row
Row Interconnect to the local interconnect.
and column interconnect.
To/From
Adjacent
LAB or IOEs
To/From
Adjacent
LAB or IOEs
Local Interconnect The 10 LEs in the LAB are driven by two
Column Interconnect
local interconnect areas. The LAB can drive
two local interconnect areas.
In most designs, the registers only use global clock and clear signals.
However, in some cases, other clock or asynchronous clear signals are
needed. In addition, counters may also have synchronous clear or load
signals. In a design that uses non-global clock and clear signals, inputs
from the first LE in an LAB are re-routed to drive the control signals for
that LAB. See Figure 3.
Altera Corporation
7
ALTERA [ ALTERA CORPORATION ]
