1–30
Chapter 1: Cyclone III Device Data Sheet
Glossary
Table 1–39. Glossary (Part 4 of 5)
Letter
Term
Definitions
tC
TCCS (Channel-
High-speed receiver/transmitter input and output clock period.
HIGH-SPEED I/O Block: The timing difference between the fastest and slowest output edges,
to-channel-skew) including tCO variation and clock skew. The clock is included in the TCCS measurement.
tcin
tCO
Delay from clock pad to I/O input register.
Delay from clock pad to I/O output.
tcout
tDUTY
tFALL
tH
Delay from clock pad to I/O output register.
HIGH-SPEED I/O Block: Duty cycle on high-speed transmitter output clock.
Signal High-to-low transition time (80–20%).
Input register hold time.
T
Timing Unit
Interval (TUI)
HIGH-SPEED I/O block: The timing budget allowed for skew, propagation delays, and data
sampling window. (TUI = 1/(Receiver Input Clock Frequency Multiplication Factor) = tC/w).
tINJITTER
Period jitter on PLL clock input.
tOUTJITTER_DEDCLK
tOUTJITTER_IO
tpllcin
Period jitter on dedicated clock output driven by a PLL.
Period jitter on general purpose I/O driven by a PLL.
Delay from PLL inclk pad to I/O input register.
Delay from PLL inclk pad to I/O output register.
tpllcout
Transmitter Output Waveforms for the LVDS, mini-LVDS, PPDS and RSDS Differential I/O
Standards
Single-Ended Waveform
Positive Channel (p) = VOH
VOD
Negative Channel (n) = VOL
V
os
Ground
Transmitter
Output Waveform
Differential Waveform (Mathematical Function of Positive & Negative Channel)
VOD
0 V
VOD
p - n
tRISE
tSU
Signal Low-to-high transition time (20–80%).
Input register setup time.
—
U
—
Cyclone III Device Handbook, Volume 2
© January 2010 Altera Corporation