11. SEU Mitigation in the Cyclone III
Device Family
December 2011
CIII51013-2.3
CIII51013-2.3
Dedicated circuitry built into the Cyclone
®
III device family (Cyclone III and
Cyclone III LS devices) consists of a cyclical redundancy check (CRC) error detection
feature that can optionally check for a single-event upset (SEU) continuously and
automatically.
In critical applications used in the fields of avionics, telecommunications, system
control, medical, and military applications, it is important to be able to:
■
■
Confirm the accuracy of the configuration data stored in an FPGA device
Alert the system to an occurrence of a configuration error
This chapter describes how to activate and use the error detection CRC feature in user
mode and describes how to recover from configuration errors caused by CRC error.
Using the CRC error detection feature for Cyclone III device family does not impact
fitting or performance.
This chapter contains the following sections:
■
■
■
■
■
■
■
■
■
■
Error Detection Fundamentals
Error detection determines if the data received through an input device is corrupted
during transmission. In validating the data, the transmitter uses a function to
calculate a checksum value for the data and appends the checksum to the original
data frame. The receiver uses the same calculation methodology to generate a
checksum for the received data frame and compares the received checksum to the
transmitted checksum. If the two checksum values are equal, the received data frame
is correct and no data corruption has occurred during transmission or storage.
© 2011 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos
are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as
trademarks or service marks are the property of their respective holders as described at
Altera warrants performance of its
semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and
services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service
described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
Cyclone III Device Handbook
Volume 1
December 2011
ALTERA [ ALTERA CORPORATION ]
