Stratix Architecture
M512 RAM Block
The M512 RAM block is a simple dual-port memory block and is useful
for implementing small FIFO buffers, DSP, and clock domain transfer
applications. Each block contains 576 RAM bits (including parity bits).
M512 RAM blocks can be configured in the following modes:
■
■
■
■
■
Simple dual-port RAM
Single-port RAM
FIFO
ROM
Shift register
When configured as RAM or ROM, you can use an initialization file to
pre-load the memory contents.
The memory address depths and output widths can be configured as
512 × 1, 256 × 2, 128 × 4, 64 × 8 (64 × 9 bits with parity), and 32 × 16
(32 × 18 bits with parity). Mixed-width configurations are also possible,
allowing different read and write widths. Table 2–4 summarizes the
possible M512 RAM block configurations.
Table 2–4. M512 RAM Block Configurations (Simple Dual-Port RAM)
Write Port
Read Port
512 × 1 256 × 2 128 × 4 64 × 8 32 × 16 64 × 9 32 × 18
512 × 1
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
256 × 2
128 × 4
64 × 8
v
32 × 16
64 × 9
v
v
v
32 × 18
v
When the M512 RAM block is configured as a shift register block, a shift
register of size up to 576 bits is possible.
The M512 RAM block can also be configured to support serializer and
deserializer applications. By using the mixed-width support in
combination with DDR I/O standards, the block can function as a
SERDES to support low-speed serial I/O standards using global or
regional clocks. See “I/O Structure” on page 2–104 for details on
dedicated SERDES in Stratix devices.
Altera Corporation
July 2005
2–27
Stratix Device Handbook, Volume 1
ALTERA [ ALTERA CORPORATION ]
