Document Revision History
Multiple Cyclone devices can be configured in any of the three
configuration schemes by connecting the configuration enable (nCE) and
configuration enable output (nCEO) pins on each device.
Table 3–5. Data Sources for Configuration
Configuration Scheme
Data Source
Active serial
Low-cost serial configuration device
Passive serial (PS)
Enhanced or EPC2 configuration device,
MasterBlaster or ByteBlasterMV download cable,
or serial data source
JTAG
MasterBlaster or ByteBlasterMV download cable
or a microprocessor with a Jam or JBC file
Table 3–6 shows the revision history for this document.
Document
Revision History
Table 3–6. Document Revision History
Date &
Document
Version
Changes Made
Summary of Changes
January 2007
v1.3
●
●
Added document revision history.
Updated handpara note below Table 3–4.
August 2005
V1.2
Minor updates.
February 2005
V1.1
Updated JTAG chain limits. Added information concerning test
vectors.
May 2003 v1.0 Added document to Cyclone Device Handbook.
Altera Corporation
January 2007
3–7
Preliminary
ALTERA [ ALTERA CORPORATION ]
