8B10B Encoder /Decoder Walkthrough
1
You can change the page that the MegaWizard Plug-In
Manager displays by clicking Next or Back at the bottom of
the dialog box. You can move directly to a named page by
clicking the Parameter Settings, Simulation Model, or
Summary tab.
Figure 2–4. Parameters
Parameterize
To parameterize your MegaCore function, follow these steps:
1. Select the mode of operation, either Encoder or Decoder
2. If you selected Encoder, turn on the Register inputs/outputs check
box for a three-cycle latency, or turn off the Register inputs/outputs
check box for a single-cycle latency.
1
The Decoder always has registered inputs and outputs.
2–6
MegaCore Version 7.2
Altera Corporation
October 2007
8B10B Encoder/Decoder MegaCore Function User Guide
ALTERA [ ALTERA CORPORATION ]
