[AK4613]
No.
67
Pin Name
RIN1+
RIN1
I/O
I
I
Function
Rch Analog Positive Input 1 Pin (DIE1 bit = “H”)
Rch Analog Input 1 Pin (DIE1 bit = “L”)
Rch Analog Negative Input 1 Pin (When DIE1 bit = “L”, this pin must be open.)
68 RIN1-
-
)
LIN2+
I
Lch Analog Positive Input 2 Pin (DIE2 bit = “H”)
69
LIN2
I
Lch Analog Input 2 Pin (DIE2 bit = “L”)
Lch Analog Negative Input 2 Pin (When DIE2 bit = “L”, this pin must be open.)
70 LIN2-
-
)
RIN2+
I
Rch Analog Positive Input 2 Pin (DIE2 bit = “H”)
71
RIN2
I
Rch Analog Input 2 Pin (DIE2 bit = “L”)
Rch Analog Negative Input 2 Pin (When DIE2 bit = “L”, this pin must be open.)
72 RIN2-
-
)
Test Pin
73 TST17
I
This pin must be open.
Test Pin
74 TST18
I
This pin must be open.
75 VSS1
-
Ground Pin, 0V
76 AVDD1
-
Analog Power Supply Pin, 3.0V∼3.6V
77 VREFH1
I
Positive Voltage Reference Input Pin, AVDD1
Common Voltage Output Pin, AVDD1x1/2
78 VCOM
O
Large external capacitor around 2.2µF is used to reduce power-supply noise.
Test Pin
79 TST19
I
This pin must be open.
Test Pin
80 TST20
I
This pin must be open.
Note 1. This pin becomes OVF pin when OVFE bit is set to “1”.
Note 2. This pin becomes DZF pin when OVFE bit is set to “0”.
Note 3. This pin becomes analog negative input pin in differential input mode, and becomes output pin invert the positive
input pin in single-end input mode. This pin must be open in single-end input mode.
Note 4. All digital input pins except for pull-down must not be left floating.
MS1052-E-02
-8-
2010/03