Precision JFET-Input
Operational Amplifiers
a
OP15/OP17
FEATURES
GENERAL DESCRIPTION
Significant Performance Advantages over LF155 and
LF157 Devices
The ADI-JFET input series of devices offer clear advantages over
industry-generic devices and are superior in both cost and perfor-
mance to many dielectrically-isolated and hybrid op amps. All devices
offer offset voltages as low as 0.5 mV with TCVOS guaranteed to
5 mV/∞C. A unique input bias cancellation circuit reduces the IB
by a factor 10 over conventional designs. In addition ADI specifies
IB and IOS with the devices warmed up and operating at 25∞C ambient.
Low Input Offset Voltages: 500 V Max
Low Input Offset Voltage Drift: 2.0 V/؇C
Minimum Slew Rate Guaranteed on All Models
Temperature-Compensated Input Bias Currents
Bias Current Specified Warmed-Up Over Temperature
Internal Compensation
Low Input Noise Current: 0.01 pA/÷Hz
High Common-Mode Rejection Ratio: 100 dB
Models with MIL-STD 883 Processing Available
These devices were designed to provide real precision performance
along with high speed. Although they can be nulled, the design
objective was to provide low offset-voltage without nulling. Systems
generally become more cost effective as the number of trim circuits
is decreased. ADI achieves this performance by use of an improved
bipolar compatible JFET process coupled with on chip, zener-zap
offset trimming.
OP15
156 Speed with 155 Dissipation: 80 mW Typ
Wide Bandwidth: 6 MHz
High Slew Rate: 13 V/s
Fast Settling to ±0.1%: 1,200 ns
T he OP15 provides an excellent combinations of high speed and
low input offset voltage. In addition, the OP15 offers the speed
of the 156A op amp with the power dissipation of a 155A. T he
combination of a low input offset voltage of 500 mV, slew rate of
13 V/ms, and settling time of 1,200 ns to 0.1% makes the OP15
an op amp of both precision and speed. T he additional features
of low supply current coupled with an input bias current makes
the OP15 ideal for a wide range of applications.
OP17
Highest Slew Rate: 60 V/s
Fastest Settling to ±0.1%: 600 ns
Highest Gain Bandwidth Product (AVCL = 5 Min): 30 MHz
Guaranteed Input Bias Current @ 125؇C
T he OP17 has a slew rate of 60 V/ms and is the best choice for
applications requiring high closed-loop gain with high speed. See
OP42 datasheet for unity gain applications and the OP215 datasheet
for a dual configuration of the OP15.
*R7, R8 ARE ELECTRONICALLY
ADJUSTED ON CHIP FOR
MINIMUM OFFSETVOLTAGE.
V+
J5
R8*
R7*
Q5
J8
NULL
NULL
Q16
Q6
Q7
R3
Q9
J6
Q19
Q24
Q8
R1
J11
NONINVERTING
INPUT
Q17
Q22
R13
J1
J2
R2
C2
Q2
–INV
INPUT
OUTPUT
Q1
Q10
J9
J10
Q3
Q4
Q12
Q23
R5
R6
3.6k⍀
Q13
Q11
Q14
Q20
Q25
3.6k⍀
R3
J4
J3
C1
7.4pF
Q21
Q16
Q15
R11
R4
V–
Figure 1. Simplified Schematic
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002
ADI [ ADI ]
